Fagor CNC 8065 - Variables Related to the Independent Axes

·874·
Installation manual
CNC 8060
CNC 8065
10.
CNC VARIABLES.
(REF: 1402)
Variables related to the independent axes.
10.55 Variables related to the independent axes.
INDEPENDENT INTERPOLATOR.
(V.)[ch].A.INDPOS.xn
(V.)[ch].A.INDPOS.sn
(V.)[ch].SP.INDPOS.sn
Variable that can only be read from the program, PLC and interface.
Variable valid for rotary and linear axes as well as for spindles.
The variable returns the execution value; reading it interrupts block preparation.
Theoretical coordinate of the independent interpolator.
Syntax.
·ch· Channel number.
·xn· Name, logic number or index of the axis.
·sn· Name, logic number or index of the spindle.
INDEPENDENT AXIS IN EXECUTION.
(V.)[ch].G.IBUSY
Variable that can only be read from the program, PLC and interface.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
An independent axis is in execution.
Syntax.
·ch· Channel number.
PERCENTAGE OF FEEDRATE (FEEDRATE OVERRIDE).
(V.)[ch].A.FRO.xn
Variable that can be read and written via program, PLC and interface.
Variable valid for rotary and linear axes.
The variable returns the execution value; reading it interrupts block preparation.
Report variable (to be used from the scripts).
Channel [ch]. Feedrate percentage active on the axis.
Syntax.
·ch· Channel number.
V.A.INDPOS.Z Z axis.
V.A.INDPOS.S Spindle S.
V.SP.INDPOS.S Spindle S.
V.SP.INDPOS Master spindle.
V.A.INDPOS.4 Axis or spindle with logic number ·4·.
V.[2].A.INDPOS.1 Axis with index ·1· in the channel ·2·.
V.SP.INDPOS.2 Spindle with index ·2· in the system.
V.[2].SP.INDPOS.1 Spindle with index ·1· in the channel ·2·.
V.[2].G.IBUSY Channel ·2·.