Operating manual.
CNC 8060
CNC 8065
AUTOMATIC MODE
4.
Tool inspection.
·107·
(REF: 1807)
Restoring the spindle turning direction.
The spindle turning direction may be restored together with the axes or separately. To do this,
it shows, next to the axes to be repositioned, the previous status of the spindle (M3, M4 or
M19). To restore the turning direction, select the softkey and press [START].
Changing the machining conditions.
When entering into tool inspection mode and also after repositioning the axes, it is possible
to change the machining conditions using the "MHSF" softkey. Pressing this softkey allows
editing the feedrate and speed values, as well as activating M and H functions. Press [START]
to assume the new values. The CNC keeps the new values when resuming the execution.
Use the [TAB] key to move through the various data. Press [ESC] or the "MHSF" softkey to
return to the standard screen of the automatic mode.
To Next Page
Loading...
