Operating manual.
CNC 8060
CNC 8065
12.
GRAPHIC ENVIRONMENT (MILL MODEL)
Description of the graphic environment.
·224·
(REF: 1807)
12.1.1 Softkey menus.
Vertical softkey menu.
The vertical softkey menu shows the options related to the operating mode that called upon
the graphic environment (EDISIMU mode for simulation, automatic mode for execution, etc.).
Horizontal softkey menu (graphic area).
When selecting this area, the horizontal softkey menu shows the necessary options for
interacting with graphics.
Softkey. Description.
"Type of graphics" Select the type of graphics.
"ZOOM" Enlarge or reduce the whole graph shown or part of it.
"Dimensions" Define the size of the graphics representation.
"Point of view" Change the point of view of the graph and show it from another
perspective.
"Measurement" Measure the distance between two points.
"Clear screen" Clear the screen or delete the graphics displayed.
"Colors" Set the appearance of the graphics on display.
"Options" Set the appearance and some options of the graphic window.
"+Real" Display either the real or the theoretical tool path.
"+Error" Display the real path, but enlarging the error with respect to the
theoretical path. Pressing this softkey also activates the one
corresponding to the real path.
"Speed" Change the simulation speed.
To Next Page
Loading...
