Operating manual.
CNC 8060
CNC 8065
GRAPHICS HD (·T· MODEL).
15.
Automatic dimensions.
·275·
(REF: 1807)
15.14 Automatic dimensions.
15.15 Saving part / Loading part.
In a machine configuration file exchange (xca file), the CNC automatically saves the current
part as LastPiece.stl and retrieves it after activating the new machine configuration.
The CNC erases the graphics and sets the dimensions that it considers as optimal,
depending on the programmed movements, in the four windows dividing the screen.
These softkeys may be used to save and load the parts as stl files (STereoLithography) to
be used in a quick prototyping (for example, 3D printers). The stl files are saved in the folder
../Users/Grafdata.
To Next Page
Loading...
