Operating manual.
CNC 8060
CNC 8065
18.
TOOL AND MAGAZINE TABLE
Tool table
·300·
(REF: 1807)
About the tools
Each tool is identified by its number, that is unique for the whole system; it cannot be repeated
in different magazines nor in ground tools. This table indicates the position and the magazine
where each tool is located, whether it is a ground tool or the tool is active in a channel.
Ground tools
A ground tool is a tool that is not stored in any magazine and is loaded manually when
requested. Ground tools are also defined in the tool table, but they are not associated with
any magazine position.
Ground tool loading and unloading is global to the system; it is not associated with any
particular magazine or channel.
To Next Page
Loading...
