Operating manual.
CNC 8060
CNC 8065
20.
PLC
Editing in C language or mnemonic language.
·350·
(REF: 1807)
20.4.4 Softkey "Operations with blocks".
This softkey is used to copy, cut and paste the information of a block or set of blocks and
export this information as an independent program. This option is only available when there
is a text selected in the program or on the clipboard. To select a text in the program, keep
the [SHIFT] key pressed while moving the cursor.
Operations with blocks "Copy"
Copy the selected text onto the clipboard.
Operations with blocks "Cut"
Copy the selected text onto the clipboard and deletes it from the program.
Operations with blocks "Paste"
Paste the contents of the clipboard into the program.
Operations with blocks "Copy to program"
Save the selected texts as an independent program. When selecting this option, the CNC
shows a list of the available programs. To save the text as a program:
1 Select the destination folder.
2 Define the file name at the bottom window. To replace an existing file, select it from the list.
3 Press [ENTER] to save the program or [ESC] to cancel the selection and close the
program listing.
When selecting this option, the softkey menu shows the available options. To return to the
main menu, press the key for the previous menu.
To Next Page
Loading...
