Operating manual.
CNC 8060
CNC 8065
APPS
25.
Send emails.
·469·
(REF: 1807)
Filters for errors, warnings and messages.
Activate/deactivate the application.
Info window.
This window shows the status of the application and the list of actions that it carries out.
Close or minimize the application.
This icon gives access to the window for selecting the errors and messages that
the user wants to receive or not. The configuration is saved in the file
FAfilters.config.
After configuring the application, it must be activated so it can send the emails.
When activating the application, it is minimized automatically. Closing the
application will stop it (deactivate it), it must be active in the background.
If the application is active, pressing this icon will minimize it.
If the application is not active, it asks whether to close the application or not;
selecting "No" will minimize it on the task bar.
To Next Page
Loading...
