Programming manual
CNC 8070
TECHNOLOGICAL FUNCTIONS
Auxiliary (miscellaneous) functions (M)
5.
(SOFT V02.0X)
87
If several spindles are programmed in a single block, the functions
apply to all of them. To apply different gears to the spindles, define next
to each M function the spindle it is associated with, as follows.
M41.S Function M41 associated with the spindle S.
The maximum speed for each gear is limited by the machine
manufacturer. Likewise, if the machine manufacturer has set the
spindle gear change so it is executed automatically [S.M.P.
"AUTOGEAR"] the CNC will manage functions M41, M42, M43 and
M44 and will change the gears according to the programmed S speed.
S1000 S2=456 M41
(Gear 1 with spindle "S" and with S2)
M41.S M42.S3
(Gear 1 with spindle "S")
(Gear 2 with spindle "S3")
To Next Page
Loading...
