Programming manual
CNC 8070
GEOMETRY ASSISTANCE
General scaling factor
7.
(SOFT V02.0X)
143
Considerations
Activating the machine coordinate system (#MCS ON) cancels the
scaling factor temporarily until the machine coordinate system is
canceled (#MCS OFF).
While the machine coordinate system is active, the scaling factor can
neither be activated nor modified.
Properties
The scaling factor stays active until canceled with another scaling
factor.
On power-up, after executing an M02 or M30, and after an
EMERGENCY or RESET, the CNC cancels the active scaling factor.
Programming example
%L PROFILE (Profile to be machined)
G90 X-19 Y0
G01 X0 Y10 F150
G02 X0 Y-10 I0 J-10
G01 X-19 Y0
M29
%PROGRAM
G00 X-30 Y10
#CALL PROFILE (Machining of profile "a")
G92 X-79 Y-30 (Coordinate preset)
#SCALE [2] (Applies a scaling factor of 2)
#CALL PROFILE (Machining of profile "b")
#SCALE [1] (Cancels the scaling factor)
M30
To Next Page
Loading...
