Programming manual
174
CNC 8070
9.
TOOL COMPENSATION
Tool radius compensation
(SOFT V02.0X)
166
STRAIGHT-TO-ARC path
When the angle between the straight line and the tangent of the arc
is smaller than or equal to 180º, the transition between the paths is
independent from the selected G136/G137 function.
When the angle between the straight path and the tangent of the arc
is greater than 180º, the way the compensated paths are joined
depends on the type of transition selected (G136/G137).
0º < α < 90º α = 90º
90º < α < 180º α = 180º
G136 G137
180º < α < 270º 180º < α < 270º
α = 270º α = 270º
270º < α < 360º 270º < α < 360º
To Next Page
Loading...
