Fagor CNC 8070 - Select the type of view.



 Programming manual
174
CNC 8070
9.
TOOL COMPENSATION
Tool radius compensation
(SOFT V02.0X)
168
ARC-TO-ARC path
When the angle between the tangents of the arcs is smaller than or
equal to 180º, the transition between the paths is independent from
the selected G136/G137 function.
When the angle between the tangents of the arcs is greater than 180º,
the way the compensated paths are joined depends on the type of
transition selected (G136/G137).
0º < α < 90º α = 90º
90º < α < 180º α = 180º
G136 G137
180º < α < 270º 180º < α < 270º
α = 270º α = 270º
270º < α < 360º 270º < α < 360º