Fagor CNC 8070 - Delete the graphic.; Define the dimensions of the parts and the size of the graphic.



 Programming manual
CNC 8070
TOOL COMPENSATION
Tool radius compensation
9.
(SOFT V02.0X)
173
ARC-TO-STRAIGHT path
When the angle between the tangent of the arc and the straight path
is smaller or equal to 180º, the way radius compensation is canceled
is independent from the G136/G137 and G138/G139 functions
selected.
When the angle between the tangent of the arc and the straight line
is greater than 180º, the way radius compensation is canceled
depends on the type of ending (G138/G139) and type of transition
selected (G136/G137).
0º < α < 90º α = 90º
90º < α < 180º α = 180º
G139/G136 G139/G137 G138
180º < α < 270º 180º < α < 270º 180º < α < 270º
α = 270º α = 270º α = 270º
270º < α < 360º 270º < α < 360º 270º < α < 360º