Fagor CNC 8070 - G88. Circular Pocket Canned Cycle



 Programming manual
CNC 8070
CANNED CYCLES
G88. Circular pocket canned cycle
10.
(SOFT V02.0X)
205
10.9 G88. Circular pocket canned cycle
Programming format in Cartesian coordinates:
G88 Z I D J B C L H V
Parameter definition:
Z Reference plane.
In G90, coordinate referred to part zero.
In G91, coordinate referred to starting plane (Zi).
If not programmed, it assumes as reference plane the current
position of the tool (Z=Zi).
I Pocket depth.
In G90, coordinate referred to part zero.
In G91, coordinate referred to reference plane (Z).
D Distance between the reference plane and the part surface. If
not programmed, it assumes a value of 0.
J Pocket radius.
The sign indicates the pocket machining direction:
(J+) clockwise, (J-) counterclockwise.