Fagor CNC 8070 - Tool and tool magazine table.



 Programming manual
CNC 8070
MULTIPLE MACHINING
G160. Multiple machining in straight line
11.
(SOFT V02.0X)
215
11.1.1 Programming example
Programming example assuming that the work plane is formed by the
X and Y axes, that the Z axis is the longitudinal axis and that the
starting point is X0 Y0 Z0:
G00 G91 X200 Y300 F100 S500
G98 G81 Z-8 I-22
G160 A30 X1200 I100 P2.003 Q6 R12
G80
G90 X0 Y0
M30
The multiple machining definition block may also be defined as follows:
G160 A30 X1200 K13 P2.003 Q6 R12
G160 A30 I100 K13 P2.003 Q6 R12