Programming manual
232
CNC 8070
11.
MULTIPLE MACHINING
G161. Multiple machining in rectangular pattern
(SOFT V02.0X)
218
Basic operation
Multiple machining is executed as follows:
1. The multiple machining calculates the next programmed point to
machine.
2. Rapid movement (G00) to that point.
3. The multiple machining will execute the selected canned cycle
after the movement.
4. The CNC will repeat steps 1-2-3 until completing the programmed
multiple machining operation.
After completing the multiple machining, the tool will remain
positioned at the last point of the programmed path where the
machining operation took place.
To Next Page
Loading...
