Fagor CNC 8070 - Encrypting files



 Programming manual
CNC 8070
CYCLE EDITOR
Reaming
12.
(SOFT V02.0X)
251
12.6 Reaming
Geometric parameters:
Machining parameters:
Spindle turning direction (icon).
Clockwise with icon
(a)
and counterclockwise with icon
(b)
X, Y Machining point.
Z Part surface coordinate.
Zs Safety plane coordinate.
P Total depth.
F Feedrate.
S Spindle speed.
TTool.
D Tool offset.
t Dwell at the bottom, in seconds.
(b)(a)