Fagor CNC 8070 - Examples of How to Define 2 D Profiles



 Programming manual
CNC 8070
CYCLE EDITOR
2D pocket
12.
(SOFT V02.0X)
281
12.13.1 Examples of how to define 2D profiles
Configuration:
Profile:
Corners
End:
Save profile
Profile P.XY FAGOR 101 Recall
Abscissa axis: X Ordinate axis: Y
Autozoom: Yes Validate
Starting point X 20 Y -8 Validate
Straight X 20 Y -40 Validate
Straight X 145 Y -40 Validate
Straight X 145 Y -25 Validate
Clockwise arc Xf 145 Yf 25 R 25 Validate
Straight X 145 Y 40 Validate
Straight X 20 Y 40 Validate
Straight X 20 Y 8 Validate
Straight X 55 Y 8 Validate
Straight X 55 Y -8 Validate
Straight X 20 Y -8 Validate
Chamfer
Select the lower left corner Enter
Chamfer 15 Enter
Select the upper left corner Enter
Chamfer 15 Enter
Escape