Fagor CNC 8070 - Messages service



 Programming manual
CNC 8070
CYCLE EDITOR
3D pocket
12.
(SOFT V02.0X)
291
12.14.1 Examples of how to define 3D profiles
Configuration:
Profile (outside profile):
End:
Save profile
Pocket P.3D FAGOR-A
Profile P.XY FAGOR 110 Recall
Abscissa axis: X Ordinate axis: Y
Autozoom: Yes Validate
Starting point X 20 Y 0 Validate
Straight X 20 Y -40 Validate
Straight X 145 Y -40 Validate
Straight X 145 Y 40 Validate
Straight X 20 Y 40 Validate
Straight X 20 Y 0 Validate