Fagor CNC 8070 - Page 328



 Programming manual
326
CNC 8070
12.
CYCLE EDITOR
3D pocket
(SOFT V02.0X)
294
Configuration:
Profile (outside depth profile):
End:
Save profile
Configuration:
Profile (island depth profile):
End:
Save profile
Profile P.Z1 FAGOR 221 Recall
Abscissa axis: X Ordinate axis: Z
Autozoom: Yes Validate
Starting point X 20 Z 0 Validate
Straight X 30 Z -20 Validate
Profile P.Z2 FAGOR 222 Recall
Abscissa axis: X Ordinate axis: Z
Autozoom: Yes Validate
Starting point X 62.5 Z -20 Validate
Straight X 77.5 Z 0 Validate