Programming manual
CNC 8070
CYCLE EDITOR
Rectangular Boss
12.
(SOFT V02.0X)
295
12.15 Rectangular Boss
The way the roughing and finishing blocks of this cycle are joined will
be the one previously set by the user with the instructions #HSC, G5,
G50 or G7. We recommend to use #HSC or G5 controlling the shape
of the corner with the instruction #ROUNDPAR.
Geometric parameters:
Type of corner (icon).
Square corner with icon
(a)
.
Rounded corner with icon
(b)
.
Chamfered corner with icon
(c)
.
X, Y Corner of the boss.
L, H Boss dimensions.
The sign indicates the orientation referred to the XY point.
Z Part surface coordinate.
Zs Safety plane coordinate.
P Total depth.
το Angle, in degrees, between the boss and the abscissa axis.
The turn is carried out on the defined corner, X,Y point.
Q Amount of stock to be removed.
r Rounding radius or chamfer size.
(b)(a)
(c)
To Next Page
Loading...
