1
1
CNC 8070
(SOFT V02.0X)
CREATING A PROGRAM
1.1 Program structure
A CNC program consists of a set of blocks or instructions that properly
organized, in subroutines or in the program body, provide the CNC
with the necessary data to machine the desired part.
Each block contains all the functions or command necessary to
execute an operation that may be machining, preparing the cutting
conditions, controlling the elements of the machine, etc.
%example
(Name of the program)
N5 F550 S1000 M3 M8 T1 D1
(Sets the machining conditions)
N6 G0 X0 Y0
(Positioning)
N10 G1 G90 X100
N20 Y50
N30 X0
N40 Y0
(Machining)
N50 M30
(End of program)
N10
N20
N30
N40
To Next Page
Loading...
