Fagor CNC 8070 - Multiple Machining in a Straight Line



 Programming manual
326
CNC 8070
12.
CYCLE EDITOR
Multiple machining in a straight line
(SOFT V02.0X)
320
12.21 Multiple machining in a straight line
Definition format (icon).
There are 5 different ways to define the machining operation.
To select the desired one, place the cursor on the icon and press
the space bar.
The number of machining operations "N" must also include the one
for the cycle defining point.
Programming example:
The canned cycle defined at point X25, Y25 is to be repeated at the
rest of the points.
We now show the 5 possible ways to define it.
1) Coordinates of the end point Xn 100, Yn 100
Total number of machining operations N 4
2) Angle of the path α 45
Distance to travel L 106.066
Total number of machining operations N 4
3) Angle of the path α 45
Total number of machining operations N 4
Distance between machining operations I 35.3553
4) Coordinates of the end point Xn 100, Yn 100
Distance between machining operations I 35.3553
5) Angle of the path α 45
Distance to travel L 106.066
Distance between machining operations I 35.3553