Programming manual
CNC 8070
CYCLE EDITOR
Multiple machining in a parallelogram pattern
12.
(SOFT V02.0X)
323
12.23 Multiple machining in a parallelogram pattern
Definition format (icon).
There are 3 different ways to define the machining operation.
To select the desired one, place the cursor on the icon and press
the space bar.
The cycle assumes the lower left point as the starting point. If it is not,
define with the proper sign the distances between holes lx and ly.
The number of machining operations "N" must also include the one
for the cycle defining point.
Programming example:
The canned cycle defined at point X25, Y25 is to be repeated at the
rest of the points.
We now show the 3 possible ways to define it.
1) Lengths in X, Y Lx 75, Ly 50
Number of machining operations in X and Y Nx 4, Ny 3
Rotation angle α 0
Angle between paths β 90
2) Number of machining operations in X and Y Nx 4, Ny 3
Distance between machining operations in X
and Y
Ix 25, Iy 25
Rotation angle α 0
Angle between paths β 90
3) Lengths in X, Y Lx 75, Ly 50
Distance between machining operations in X
and Y
Ix 25, Iy 25
Rotation angle α 0
Angle between paths β 90
To Next Page
Loading...
