13
327
CNC 8070
(SOFT V02.0X)
COORDINATE
TRANSFORMATION
The description of the general coordinate transformation is divided
into these basic functionalities:
• Selection of the kinematics. #KIN ID instruction.
• Definition and selection of the machining coordinate system
(incline plane). #CS instruction.
• Definition and selection of the fixture coordinate system. #ACS
instruction.
• RTCP (Rotating Tool Center Point) transformation. #RTCP
instruction.
• Orient the tool perpendicular to the work plane (parallel to the third
axis). #TOOL ORI instruction.
• Tool length compensation adaptation implicit in the program. #TLC
instruction.
For clarity's sake, the following examples show three coordinate
systems:
When no transformation has been made and the spindle is in the
starting position, the three coordinate systems coincide.
XYZ Machine coordinate system.
X' Y' Z' Part coordinate system.
X" Y" Z" Tool coordinate system.
To Next Page
Loading...
