Programming manual
CNC 8070
COORDINATE TRANSFORMATION
Movement in an incline plane
13.
(SOFT V02.0X)
329
13.1 Movement in an incline plane
An incline plane is any plane in space resulting from the coordinate
transformation of the XYZ axes.
Any plane in space may be selected to carry out machining operations
in it.
To define the incline plane corresponding to the machining operations,
use the #CS and #ACS instructions that are described later on in this
chapter.
The new coordinates (right figure) are referred to the new part zero
assuming that the tool is positioned perpendicular to the new plane.
To place the tool at that position, use the #TOOL ORI instruction
(apartado 13.8) or the kynetics related variables (apartado 13.8)
that indicate the position that each rotary axis of the spindle head must
occupy.
From this moment on, the programming and the X, Y movements are
carried out along the selected plane and those of the Z axis will be
perpendicular to it.
To Next Page
Loading...
