Fagor CNC 8070 - Coordinate System Definition MODE 3



 Programming manual
354
CNC 8070
13.
COORDINATE TRANSFORMATION
Coordinate systems (#CS) (#ACS)
(SOFT V02.0X)
338
13.3.3 Coordinate system definition MODE 3
#CS DEF [n] [MODE 3, V1, V2, V3, ϕ1, ϕ2, ϕ3, 0/1]
#ACS DEF [n] [MODE 3, V1, V2, V3, ϕ1, ϕ2, ϕ3, 0/1]
The incline plane is defined with the angles it forms with respect to the
1
st
and 2
nd
axes (X Y) of the machine's coordinate system.
V1, V2, V3 Define the coordinate origin of the incline plane with
respect to the current part zero.
ϕ1, ϕ2 Define the angles that the incline plane forms with
the 1
st
and 2
nd
axes (X Y) of the machine's
coordinate system.
0/1 Defines which of the axes of the new plane (X' Y' )
is aligned with the edge.
If <0> the X' axis and if <1> the Y' axis.
If not programmed, it assumes <0>.
ϕ3 Permits defining and applying a coordinate rotation
in the new cartesian plane X' Y'.