Fagor CNC 8070 - Coordinate System Definition MODE6



 Programming manual
CNC 8070
COORDINATE TRANSFORMATION
Coordinate systems (#CS) (#ACS)
13.
(SOFT V02.0X)
341
13.3.6 Coordinate system definition MODE6
#CS DEF [n] [MODE 6, V1, V2, V3, ϕ1]
#ACS DEF [n] [MODE 6, V1, V2, V3, ϕ1]
It defines a new work plane (incline plane) perpendicular to the
direction of the tool.
The new work plane assumes the orientation of the tool's coordinate
system.
In order to use this definition, while setting up the machine, the tool
position when it is parallel to the Z axis of the machine must be set as
the spindle's rest position.
i
V1, V2, V3 Define the coordinate origin of the incline plane with
respect to the current part zero.
Example:
On this machine, only the main rotary axis has rotated. See the rest position
of the spindle at the top right side.