Programming manual
354
CNC 8070
13.
COORDINATE TRANSFORMATION
Coordinate systems (#CS) (#ACS)
(SOFT V02.0X)
342
The main axis has rotated 90º and, therefore, the X' Y' axes of the
plane are rotated 90º.
If on the last machine, we wanted to orient the X', Y' axes like in the
other two cases, we would have to program the following:
#CS DEF [n] [MODE 6, V1, V2, V3, -90]
Example:
On this machine, only the main rotary axis has rotated. See the rest position
of the spindle at the top right side.
Example:
On the contrary, on this machine, to achieve the same tool orientation, both
the main and secondary rotary axes have rotated. See the rest position of
the spindle at the top right side.
ϕ1 Permits defining and applying a coordinate rotation
in the new cartesian plane X' Y'.
To Next Page
Loading...
