Fagor CNC 8070 - Chapter 23 APPS



 Programming manual
CNC 8070
CNC VARIABLES
Related to axis machine parameters
14.
(SOFT V02.0X)
373
ROTARY AXES AND SPINDLE
Lin Rot Spd Ana Ser
(V.)[n].MPA.MODUPLIM[g].Xn
Module's upper limit — Yes Yes Yes S
(V.)[n].MPA.MODLOWLIM[g].Xn
Module's lower limit — Yes Yes Yes S
(V.)[n].MPA.MODNROT[g].Xn
Module error. Number of turns — Yes Yes Yes S
(V.)[n].MPA.MODERR[g].Xn
Module error. Number of increments — Yes Yes Yes S
SPINDLE Lin Rot Spd Ana Ser
(V.)[n].MPA.SZERO[g].Xn
Speed considered "0 rpm" — — Yes — P/S
(V.)[n].MPA.POLARM3[g].Xn
Analog voltage sign M3
"0" = Negative "1" = Positive
——Yes— S
(V.)[n].MPA.POLARM4[g].Xn
Analog voltage sign M4
"0" = Negative "1" = Positive
——Yes— S
ANALOG VOLTAGE
Lin Rot Spd Ana Ser
(V.)[n].MPA.SERVOOFF[g].Xn
Offset compensation Yes Yes Yes Yes —
(V.)[n].MPA.MINANOUT[g].Xn
Minimum analog output Yes Yes Yes Yes —
ANALOG OUTPUT / FEEDBACK INPUT
Lin Rot Spd Ana Ser
(V.)[n].MPA.ANAOUTID[g].Xn
Analog output of the axis Yes Yes Yes Yes —
(V.)[n].MPA.COUNTERID[g].Xn
Feedback input for the axis Yes Yes Yes Yes —