Fagor CNC 8070 - Related to Magazine Parameters



 Programming manual
CNC 8070
CNC VARIABLES
Related to magazine parameters
14.
(SOFT V02.0X)
377
14.7 Related to magazine parameters
These variables are read-only (R) synchronous and are evaluated execution time.
They have generic names.
• Replace the "z" character with the magazine number, maintaining the brackets.
(V.)TM.MZSIZE[z] V.TM.MZSIZE[1]
MAGAZINE
PRG PLC INT
(V.)TM.NTOOLMZ
Number of tool magazines R R R
(V.)TM.MZGROUND[z]
Ground tools allowed
"0" = No "1"= Yes
RRR
(V.)TM.MZSIZE[z]
Magazine size R R R
(V.)TM.MZRANDOM[z]
Random magazine
"0" = No "1"= Yes
RRR
(V.)TM.MZTYPE[z]
Type of magazine
"1" = Asynchronous
"2" = Synchronous
"3" = Turret
"4" = Synchronous with 1 arm
"5" = Synchronous with 2 arms
RRR
(V.)TM.MZCYCLIC[z]
Cyclic tool changer
"0" = No "1"= Yes
RRR
(V.)TM.MZOPTIMIZED[z]
Tool management
"0" = No "1"= Yes
RRR
(V.)TM.MZM6ALONE[z]
Action when executing an M6 without a tool
"0" = Nothing "1" = Warning "2" = Error
RRR