Fagor CNC 8070 - Page 420



 Programming manual
402
CNC 8070
14.
CNC VARIABLES
Jog mode related
(SOFT V02.0X)
386
The variables associated with the jog mode are modified when changing the value of the –F– field
from the jog mode screen. These variables are not affected when changing the feedrate from the MDI
mode.
JOG FEEDRATES
PRG PLC INT
(V.)[n].G.FMAN
JOG feedrate in G94 R/W R R/W
(V.)[n].G.MANFPR
JOG feedrate in G95 R/W R R/W