Programming manual
CNC 8070
CNC VARIABLES
Related to the programmed functions
14.
(SOFT V02.0X)
395
These variables are read-only (R) synchronous and are evaluated during execution. These
variables correspond to linear and rotary axes and spindles.
The PLC reading of ACFGAIN comes in tenths (x10) The PLC reading of FFGAIN comes in
hundredths (x100) Ver "Access to numeric values from the PLC" en la página 358.
FEED-FORWARD AND AC-FORWARD PRG PLC INT
(V.)[n].A.FFGAIN.Xn
Active percentage of feed-forward R R R
(V.)[n].A.ACFGAIN.Xn
Active percentage of AC-forward R R R
To Next Page
Loading...
