Programming manual
486
CNC 8070
15.
STATEMENTS AND INSTRUCTIONS
Programming statements
(SOFT V02.0X)
416
#WARNING Display a warning by selecting its text
It displays the indicated warning text. If no text is defined, it shows an
empty warning window.
The programming format is:
#WARNING [<text>]
The warning text must be defined between quote marks. Certain
special characters are defined as follows.
Including external values in the error text
The identifier %D or %d may be used to insert external values
(parameters or variables) into the text. The data whose value is to be
displayed must be defined after the text.
Up to 5 identifiers %D or %d may be defined, but there must be as
many data values as identifiers.
Message display
The indicated message appears at the top of the screen and it does
not interrupt the execution of the program. The message will stay
active until a new one is activated (it is not canceled when executing
the end-of-program function "M02" or "M30").
The text to be displayed is programmed using the #MSG instruction
#MSG Display a message
The programming format is:
#MSG ["<text>"]
Parameter Meaning
<number> Warning text.
\" Inserts quote marks in the text.
%% Inserts the % character.
#WARNING ["Message"]
#WARNING ["Parameter \"P100\" is wrong"]
#WARNING ["Difference between P12 and P14 > 40%%"]
#WARNING ["Wrong %d value",120]
#WARNING ["Tool %D expired",V.G.TOOL]
#WARNING ["Wrong %D - %D values",18,P21]
Parameter Meaning
<text> Message text.
To Next Page
Loading...
