Programming manual
CNC 8070
STATEMENTS AND INSTRUCTIONS
Programming statements
15.
(SOFT V02.0X)
457
#HCS ON It activates high speed machining
It activates the HSC mode that lets execute programs made up of lots
of small blocks, typical of high speed machining.
The programming format is:
#HCS ON [CONTERROR <error>]
The parameter of this instruction is the maximum contour error
permitted between the programmed path and the resulting path.
Programming it is optional; if not defined, it assumes as maximum
contouring error the value set in machine parameter MAXROUND.
#HCS OFF It cancels high speed machining (cutting)
It cancels the high speed machining mode.
The programming format is:
#HCS OFF
HSC is also canceled when programming any of the functions G05,
G07 or G50.
Parameter Meaning
<error> Optional. Maximum contouring error allowed.
To Next Page
Loading...
