Programming manual
CNC 8070
STATEMENTS AND INSTRUCTIONS
Programming statements
15.
(SOFT V02.0X)
475
[ Nratio ]Gear ratio (slave axis)
Numerator of the gear ratio. Turns of the slave axis.
[ Dratio ]Gear ratio (master axis)
Denominator of the gear ratio. Rotations of the master axis.
[ synctype ]Type of synchronization
Optional parameter. Indicator that determines whether it is a velocity
or position synchronization type.
Programming it is an option. If not programmed, it executes a velocity
synchronization.
[ synctype ] Type of synchronization
POS It is a position synchronization.
VEL It is a velocity synchronization.
#FOLLOW ON [X, Y, N1, D1]
#FOLLOW ON [A1, U, N2, D1, POS]
#FOLLOW OFF [Y]
To Next Page
Loading...
