2
21
CNC 8070
(SOFT V02.0X)
MACHINE OVERVIEW
2.1 Axis nomenclature
With this CNC, the manufacturer may select up to 28 axes (that must
be properly defined as linear, rotary, etc. by setting machine
parameters), without no limitation as how to program them and they
may all be interpolated at the same time.
The DIN 66217 standard denomination for the axes is:
However, the machine manufacturer may call the axes differently.
As an option, the name of the axes may be followed by a number
between 1 and 9 (X1, X3, Y5, A8...).
X-Y-Z Main axes of the machine. The X-Y axes form the main work
plane whereas the Z axis is parallel to the main axis of the
machine and perpendicular to the XY plane.
U-V-W Auxiliary axes, parallel to X-Y-Z respectively.
A-B-C Rotary axes, on X-Y-Z respectively.
Axis nomenclature on different machines.
To Next Page
Loading...
