Programming manual
40
CNC 8070
3.
COORDINATE SYSTEM
Plane selection (G17/G18/G19/G20)
(SOFT V02.0X)
32
Considerations
When selecting the longitudinal axis with G20, tool orientation may be
established according to the programmed sign.
• If the parameter to select the longitudinal axis is positive, the tool
is positioned in the positive direction of the axis.
• If the parameter to select the longitudinal axis is negative, the tool
is positioned in the negative direction of the axis.
G20 X1 Y2 Z3 G20 X1 Y2 Z-3 G20 X1 Y2 X-3 Z5
To Next Page
Loading...
