Quick reference
24
(SOFT 03.1X)
G162. Longitudinal slot milling cycle
G162 X Z L I Q A J D F S N
X X coordinate where the cycle is to be executed.
Z Z coordinate where the cycle is to be executed.
L Length of the slot referred to the starting point.
I Depth of the slot referred to the starting point.
Q Angular position for the spindle to execute the cycle.
A Angular step between two consecutive operations.
J Number of slots to be milled.
D
Safety distance along the X axis and indicates how
far from the starting point the tool will approach the
part.
F Slot milling feedrate.
S Live tool turning speed and direction.
N Number of the spindle for the live tool.
G163. Radial slot milling cycle (on the face of the part)
G163 X Z L I Q A J D F S N
X X coordinate where the cycle is to be executed.
Z Z coordinate where the cycle is to be executed.
L Length of the slot referred to the starting point.
I Depth of the slot referred to the starting point.
Q Angular position for the spindle to execute the cycle.
A Angular step between two consecutive operations.
J Number of slots to be milled.
D
Safety distance along the Z axis and indicates how
far from the starting point the tool will approach the
part.
F Slot milling feedrate.
S Live tool turning speed and direction.
N Number of the spindle for the live tool.
To Next Page
Loading...
