Quick reference
29
(SOFT 03.1X)
#PROBE 11. Circular part centering
PROBE 11 <X Y Z> J <K> <L> <B> D E <H>
<F> <Q>
X..Z Probe position when calling the cycle.
J Part diameter.
K Axis and direction of the first probing movement.:
• "K"=0: the probe moves in the positive direction
of the X axis.
• "K"=1: the probe moves in the negative direction
of the X axis.
• "K"=2: the probe moves in the positive direction
of the Y axis.
• "K"=3: the probe moves in the negative direction
of the Y axis.
L Surface coordinate measuring:
• "L"=0: the cycle does not measure the surface
coordinate.
• "L"=1: the cycle measures the surface
coordinate.
B Safety distance.
D Safety distance along Z.
E Withdrawal distance after initial probing.
H Feedrate for the initial probing movement.
F Probing feedrate.
Q Feedrate for approach movements.
D
B
E
To Next Page
Loading...
