Quick reference
30
(SOFT 03.1X)
PROBING CANNED CYCLES (LATHE)
ISO coded cycles are defined with the #PROBE instruction followed by the number of the cycle to be executed
and the call parameters.
The optional parameters appear between angular brackets .
#PROBE 1. Tool calibration
#PROBE 1 B F <K> <X U Z W Y V>
B Safety distance defined in radius.
F Probing feedrate.
K
It indicates how many sides of the probe will be used
for calibration:
"K"=0: calibration on the X, Z sides.
"K"=1: calibration on the X, Z, Y+ sides.
"K"=2: calibration on the X, Z, Y- sides.
X..W Tabletop probe position.
#PROBE 2. Tabletop probe calibration.
#PROBE 2 B F <K> <X U Z W Y V>
B Safety distance defined in radius.
F Probing feedrate.
K
It indicates how many sides of the probe will be used
for calibration:
"K"=0: calibration on the X, Z sides.
"K"=1: calibration on the X, Z, Y+ sides.
"K"=2: calibration on the X, Z, Y- sides.
X..W Tabletop probe position.
B
B
B
B
To Next Page
Loading...
