Hardware configuration.
CNC 8070
6.
CENTRAL UNIT + MONITOR (Q7-A PLATFORM).
Non-volatile RAM (FRAM).
·106·
(REF: 1911)
6.5 Non-volatile RAM (FRAM).
The CNC has non-volatile RAM (FRAM) that keeps the information saved in it even when
a power failure occurs. The non-volatile RAM (FRAM) always saves the position of the axes,
the rest of the data that it saves is determined by machine parameters, like for example, PLC
registers (parameter BKUPREG), common arithmetic parameters (parameter BKUPCUP),
etc.
6.6 Hardware functionality (connectors).
6.6.1 Front of the monitor.
USB 2.0 port accessible from the front and protected by a cover, for the connection of a
pendrive, mouse or keyboard. The cover must be tightly closed for the keyboard to comply
with standard IP65.
To Next Page
Loading...
