Hardware configuration.
CNC 8070
CENTRAL UNIT + MONITOR (Q7-A PLATFORM).
6.
Hardware functionality (connectors).
·107·
(REF: 1911)
6.6.2 Rear.
I65
A22
F2A
I23
I24
X27
E36
H30C
H30BH30A
H62
H31B
B32
B64
B28 E21 I26
I25
RS
Connector.
·A22· 24 V supply input. See Page 108.
·B28· CAN bus. See Page 108.
·B32· Sercos II bus. See Page 108.
·B64· EtherCAT bus. See Page 109.
·E21· Local feedback input. See Page 109.
·E36· Handwheel input (only C70-10K model). See Page 109.
·F2A· Protection fuse. See Page 110.
·H30A·
·H30B·
USB-A 2.0 Ports. See Page 110.
·H30C· USB-A 3.0 Ports. See Page 110.
·H31B· Ethernet. See Page 110.
·H62· CFast See Page 111.
·I23· Local digital inputs. See Page 111.
·I24· Local digital outputs. See Page 112.
·I25· Probe input. See Page 112.
·I26· General purpose ±10 V analog output (16 bits). See Page 113.
·I65· UPS control. See Page 113.
·X27· Relay for the emergency chain. See Page 113.
·RS· RS232 / RS422 / RS485 serial line. See Page 114.
To Next Page
Loading...
