Fagor CNC 8070 - Page 114

Hardware configuration.
CNC 8070
6.
CENTRAL UNIT + MONITOR (Q7-A PLATFORM).
Hardware functionality (connectors).
·114·
(REF: 1911)
·RS· RS232 / RS422 / RS485 serial line (available soon).
The type of serial line is selected by means of the machine parameters (parameter RSTYPE).
Plug-in part. 9-pin male SUB-D connector.
Pin. RS232 signal. RS422 signal. RS485 signal.
1 DCD - - - - - -
2 RxD LineTerm 120 . LineTerm 120 .
3 TxD /LineTerm 120 . /LineTerm 120 .
4 DTR - - - - - -
5 GND GND GND
6DSR TxD - - -
7 RTS /TxD - - -
8CTS RxD TxD RxD
9 RI /RxD /TxD /RxD
1 ... 5
6 ... 9