Hardware configuration.
CNC 8070
7.
CENTRAL UNIT FOR CABINET (Q7-A PLATFORM).
Specifications.
·138·
(REF: 1911)
7.1 Specifications.
Type. Description.
General. • In-cabinet Central Unit
• Dimensions (width x height x depth)
- 36.5 × 313.1 × 235.5 mm.
- 1.43" × 12.32" × 9.27".
System. • Processor:
- 8070 BL - CP-IC-E352-2-2.
- 8070 OL (select) - CP-IC-E352-2-2.
- CP-IC-E354-4-4.
- 8070 L - CP-IC-E354-4-4.
•RAM:
-2 GB.
• Non-volatile RAM (FRAM).
• Storage (select):
(SO, CNC and user programs.
- Internal 8 GB NandFlash.
• Storage expansion (optional):
(additional storage space for user programs).
- CFast 32 GB.
- CFast 128 GB.
• Without fan.
• Without battery.
• SO (select):
- Windows 7 (32 bits).
- Windows 7A (32 bits multi-touch).
Regulation. • CE.
Packaging. • The package meets the regulation EN 60068-2-32 procedure 1 with a
random fall from a height not greater than 1 m.
Ambient. • Storage and transport temperature:
- Between -40 ºC (-40 ºF) and +70 ºC (158 ºF).
• CNC working temperature:
- Between 5 ºC (41 ºF) and 55 ºC (131 ºF).
• Working temperature outside the cabinet:
- Between 5 ºC (41 ºF) and 40 ºC (104 ºF).
• Working temperature inside the cabinet:
- Between 5 ºC (41 ºF) and 55 ºC (131 ºF).
• Relative humidity:
- 20 ~ 85% RH without condensation.
• Pollution degree 2.
• Maximum work altitude:
- The unit must work properly at 2000 m according to IEC 61131-2.
• Vibration test according to IEC 60068-2-6 with a frequency step of 1
octave/minute (±10%) and a duration of 10 sweeps.
-5 Hz f 8.4 Hz; movement of constant 3.5 mm amplitude (peak value).
-8.4 Hz f 150 Hz; 1g acceleration and constant amplitude (peak value).
• Degree of protection: IP20.
Power supply. • Use a regulated 24 V DC power supply (between -15% and +20%) and 2 A
(including voltage ripple and noise). The power supply must meet the
UL1950 standard.
Connectivity. • 4 USB 2.0 ports
• 1 USB 3.0 port.
• 1 Ethernet port for 10/100/1000 BaseT connection.
• 1 DVI-D video output (maximun resolution of 1920×1200).
• CAN Bus (CANfagor/CANopen).
• Sercos II bus.
• EtherCAT bus.
To Next Page
Loading...
