Hardware configuration.
CNC 8070
CENTRAL UNIT FOR CABINET (Q7-A PLATFORM).
7.
Non-volatile RAM (FRAM).
·145·
(REF: 1911)
7.5 Non-volatile RAM (FRAM).
The CNC has non-volatile RAM (FRAM) that keeps the information saved in it even when
a power failure occurs. The non-volatile RAM (FRAM) always saves the position of the axes,
the rest of the data that it saves is determined by machine parameters, like for example, PLC
registers (parameter BKUPREG), common arithmetic parameters (parameter BKUPCUP),
etc.
To Next Page
Loading...
