Hardware configuration.
CNC 8070
CENTRAL UNIT FOR CABINET (Q7-A PLATFORM).
7.
Hardware functionality (connectors).
·147·
(REF: 1911)
7.6.2 Top.
7.6.3 Bottom.
Connector.
·H30D· Type A USB 2.0 port. See Page 150.
·H31A· Ethernet. See Page 150.
·H61· Type A USB 3.0 port. See Page 150.
·H62· CFast See Page 151.
Ground connection.
Connector.
·A22· 24 V supply input. See Page 148.
·F2A· Protection fuse. See Page 149.
·I23· Local digital inputs. See Page 152.
·I24· Local digital outputs. See Page 153.
·I65· UPS control. See Page 155.
·X27· Relay for the emergency chain. See Page 155.
To Next Page
Loading...
