Hardware configuration.
CNC 8070
·15·
(REF: 1911)
VERSION HISTORY - CNC 8070
Here is a list of the features added to each manual reference.
Ref. 0601
Ref. 0609
Ref. 0705
Ref. 0706
Ref. 0710 / Ref. 0801
Ref. 0804
Ref. 0809
Ref. 0907
The PCI central unit is removed from the manual.
New monitor LCD-15".
The floppy disk unit with USB connectors is removed from the manual.
Remote modules (bus CAN with CANopen protocol).
ICU central unit.
MCU central unit.
15" passive screen.
Corrected the numbering of the pinout of "Phoenix Contact" connectors
The handwheel module with the E-stop button has been removed from the manual.
Corrected mouse dimensions.
The PC104 central unit is removed from the manual.
The VGA cable for passive screens is valid for cable carrying chains.
The remote modules with CANopen are now called RIO5 remote modules.
The remote modules with CANfagor are now called RIO70 remote modules.
New RIOW remote modules.
Corrected errors. Remote modules RIOW and RIO5 cannot handle a probe.
RS485 pinout correction.
Mechatrolink bus.
PCI expansion module for MCU central unit.
To Next Page
Loading...
