Hardware configuration.
CNC 8070
CENTRAL UNIT FOR CABINET (Q7-A PLATFORM).
7.
Hardware functionality (connectors).
·151·
(REF: 1911)
·H62· CFast.
·H66· DVI-D video output.
Additional storage space for user programs.
To help increase storage space, Fagor Automation lists several CFast cards in its catalog; when using
a third-party CFast, always use an industrial grade CFast SLC as these support temperatures from
between -40ºC and +85ºC (-40 ºF and 185 ºF) and can last five years with constant day-to-day writing.
Fagor Automation shall not be held responsible for any problems caused by using lower-quality CFast
cards.
See "7.8.3 Connecting the DVI-D video output." on page 160.
DVI-D video output. Maximun resolution of 1920×1200.
Pin. Señal.
1 TMDS 2- Red- (Link 1).
2 TMDS 2+ Red+ (Link 1).
3 TMDS 2/4 SHIELD
4 TMDS 4- Green- (Link 2).
5 TMDS 4+ Green+ (Link 2).
6 DDC clock.
7 DDC data.
8 Not used.
9 TMDS 1- Green- (Link 1).
10 TMDS 1+ Green+ (Link 1).
11 TMDS 1/3 SHIELD.
12 TMDS 3- Blue- (Link 2).
13 TMDS 3+ Blue+ (Link 2).
14 +5 V DC.
15 GND.
16 Hot plug detection.
17 TMDS 0- Blue- (Link 1) and digital synchronization.
18 TMDS 0+ Blue+ (Link 1) and digital synchronization.
19 TMDS 0/5 SHIELD
20 TMDS 5- Red- (Link 2).
21 TMDS 5+ Red+ (Link 2).
22 TMDS clock protection.
23 TMDS clock+ (Links 1 and 2).
24 TMDS clock- (Links 1 y 2).
Pin. Señal.
C1 Not being used.
C2 Not being used.
C3 Not being used.
C4 Not being used.
C5 Not being used.
To Next Page
Loading...
