Hardware configuration.
CNC 8070
LCD-15SVGA. PASSIVE MONITOR " LCD15-SVGA".
8.
·175·
(REF: 1911)
8 LCD-15SVGA. PASSIVE MONITOR " LCD15-SVGA".
The passive screen may be used to display the video signal coming from the ·VGA·
connector of the central unit and also interact with the central unit using softkeys. This screen
may be the only one connected to the central unit (for example, with the central unit MCU)
or it may be a second monitor (for example, with the central unit ICU). When the screen is
used as a second monitor, both monitors show the same video signal.
DISCONTINUED
General characteristics.
Power supply. 24 V DC universal power supply.
Connection. Connect the screen to the ·VGA· output and the softkeys to the
keyboard.
Degree of protection. The face plate meets the IP 65 protection standard and the rear the
IP 2X standard.
To Next Page
Loading...
