Hardware configuration.
CNC 8070
8.
LCD-15SVGA. PASSIVE MONITOR " LCD15-SVGA".
Elements (connectors).
·182·
(REF: 1911)
Ground connection.
Remember that the ground terminals of all the elements making up the system must be
connected to a single ground point.
·VGA· connector.
24 V DC voltage supply.
Softkeys.
Connection of the softkeys of the monitor to the keyboard. Maximum cable length is 1 meter.
1 ... 5
6 ... 10
11 ... 15
Plug-in part. 15-pin male SUB-D HD type connector.
Pin. Signal.
1MAINS
2 GREEN
3BLUE
4- - -
5GND
6 GND_RED
7 GND_GREEN
8 GND_BLUE
9- - -
10 GND_SYNC
11 - - -
12 - - -
13 HSYNC
14 VSYNC
15 - - -
Plug-in part. 3-pole Phoenix-type combicon connector (7.62 mm
pitch).
Pin Signal. Function.
1Chassis.
2 GND 0 V reference signal.
3 +24 V Power supply.
1
To Next Page
Loading...
